award winning bathroom designs
how to install a carrier frame openingfor carrier there is an installation mark on the frame and tank for ada a bowl height the mark should be 39 inches above the finished floor the legs areadjustable one bolt on each side locks the leg into place the legs can also befully removed and rotated 90 degrees if there is limited space behind the feet check that the front of the carrier isflush with the front of the stud wall mark three holes in each side of thecarrier mark a hole in the center of each foot drill holes attach carrier tostuds and bottom plate with included lag bolts and washers for metal studs useincluded nuts bolts and washers instead
of lag bolts connect included drainelbow to existing drain with the included furnco coupling tighten both sides of the furncocoupling install threaded rods and use included nuts to lightly lock into place plumbers grease will make bothconnections easier after applying plumbers grease to the trim guardsinsert them into the drain and supply elbows place clear trim guards overthreaded rods snap the last trim guard onto the flush plate opening the carrierbox has a template printed on one side the flush plate trim guard is cut flushwith the finished wall grooves around
the trim guard help maintain straightlines while cutting
0 Response to "award winning bathroom designs"
Post a Comment